- Green PTFE coating
- Stainless
mesh
- Air and fuels pass through
- Water beads on the surface
- Documented Weaving & Coating Quality
- For Coalescing Filters
- Handle with gloves
More facts about PTFE coated stainless steel wire mesh
Our mesh is cleaned and coated with PTFE using a documented proprietary process on rolls 100 feet long.
PTFE Quick Facts
Excellent
resistance (no attack) to Dilute and Concentrated Acids, Alcohols,
Aldehydes, Bases, Esters, Aliphatic, Aromatic and Halogenated
Hydrocarbons, ketones, Mineral Oils, Vegetable Oils and Oxidizing
Agents.
- Maximum Temperature: 572°F 300°C
- Minimum Temperature: -328°F -200°C
- Autoclavable: Yes
- Melting Point: 626°F 330°C
- Tensile Strength: 6,240 psi
- Hardness: R58
- UV Resistance: Excellent
- Opaque
- Rigid
- Specific Gravity: 2.2
PTFE coated mesh applications and Ideas
- PTFE coated is an extremely unusual wire mesh material.
- Water beads up on it surface while gases pass freely through its apertures.
- PTFE coated stainless steel wire mesh material may be used to separate water from diesel fuel or gasoline.
- Used extensively in coalescing filters
- Water resistant speaker grilles and microphones use this special mesh.
- Applications where air and sound must pass but water but not penetrate.
- Chemically inert coating.
- As a non-stick surface with a high tensile mesh underbody
- Separation and small part drying surface
This is a plain square weave (over one, under one).. Weaving meets ANSI/AWCI - 01 -1992 and ASTM E 2016-99 and RRW 360
PTFE coated Wire Mesh - Cutting
100 and 200 mesh may be cut into simple with sturdy scissors
TWP can provide precision-cut discs and shapes.
Sample Policy
TWP Inc. will provide small samples for your testing and inspection
PTFE Coated Mesh samples are 1 inch by 1 inch
Sample price is $16 USD